Knowledgebase
Wind Environmental Services Support Site > Wind Environmental Services Support Site > Knowledgebase

Search help:


» Category: Trimble Geo7 Series  (Go back)

» Articles in this category:

 
GEO 7X HANDHELD: ORIENTATION SENSOR CALIBRATION Article not rated yet
GEO 7X HANDHELD: ORIENTATION SENSOR CALIBRATION  TYPES OF CALIBRATION  The Geo 7X handheld is equipped with a field calibration utility to make calibrating the system sensors in the field&...
ALIGNING THE CAMERA AND RANGEFINDER Article not rated yet
SUMMARY  The sensors in the Geo 7X handheld camera and rangefinder module must be aligned so that you can accurately point and aim the rangefinder at your target objects using the camera.&n...
Trimble Geo 7X Handheld Proper Cell Phone Handling Article not rated yet
Some Trimble® GeoExplorer® Geo7X handhelds may experience an operating system lockup when suspending or powering off. This forces the user to hard reset the handheld. The problem can occur aft...
Trimble Geo 7X Handheld: Configuring The Rangefinder In ESRI ArcPad Software Article not rated yet
To send offset data automatically from the Geo7X integrated laser rangefinder’s measurements to the Esri ArcPad software, you must first configure the rangefinder properly in the Esri ArcPad sof...
Trimble Geo 7X Handheld: Rangefinder - Magnetic Declination Article rated 5.0/5.0
The Geo 7 series rangefinder may not use the correct magnetic declination angle for your location.This issue occurs if you run the Rangefinder application prior to the Geo7X receiver calculating a GNS...